INNOVATIONS
80
OCTOBER 2017 — PFonline.com
T urnkey Parts-Cleaning
and Processing Systems
Cleaning
Nital Etching
Steel and Titanium Etching
Titanium and Aluminum Anodizing
Pickling
Chromating/Alodine
Passivating
Electropolish
Chemical Polish for Steel
Process design, equipment design
and experienced world-wide
installation
®
www.miraclean.com
716.763.4343
Painting, Anodizing, Plating and Vacuum
Coating Small Part Racks From Endura
●
No Minimum - one rack or 1,000
●
High Density of Parts Held
Securely
●
Racks Custom Designed to Hold Your Parts
●
Affordable
Increase Your Profits!
Endura Corporation
510 Church Street Phone: 941- 485-7235
Nokomis, Florida 34275 Fax: 941- 485-6311
www.enduraracking.com enduracorp@verizon.net
• Prolongs Rack Life
• No Electrical Hookup
• Improves Productivity
• Heavy Duty Construction
• Dual Switch Activation
• 70 psi Air Supply Required
• Eliminates Carpal Tunnel Syndrome
• Rack and Unrack on the Same Machine
• Handles Single, Two and Four Sided Racks
Reduce Small Part Racking Labor by 70%
Proven!
System Converts
Standard Pipe into
High-Volume
Conveyor
Exair's aluminum 2½
NPT and 3 NPT threaded
Line Vac air-operated
conveyors are designed
to convert ordinary pipe
into a conveying system
for parts, scrap, trim and
other bulk materials.
Their larger size enables
conveying bigger parts
and large volumes
of material over long
distances, the company says. The product is designed to attach
to standard plumbing pipe couplers, allowing users to build a
complete system with pipe and fittings available from home
centers or hardware stores.
The units also are available in smaller sizes to 3/8 NPT, and in
Type 303 and Type 316 stainless steel for more demanding high-
temperature, corrosive and hygienic environments.
Exair Corp. /
800-903-9247 / exair.com
Pendulum Hardness Tester Ensures Accurate Results
The Elcometer 3045 pendulum
hardness tester uses infrared tech-
nology to measure coating hardness,
providing a fully automated Persoz
or König pendulum hardness test
without human intervention, ensur-
ing more accurate, repeatable and
reproducible results.
Users fit the pendulum on to the
loading pins, load the sample
and close the door. The pen-
dulum automatically moves
to the start position, the
sample table rises and
the test begins. Maximum
sample size is 200 × 110 × 14 mm.
The instrument performs a full calibration rou-
tine and automatically adjusts to meet the specified standard.
Batch memory stores all test data for output to a PC via the
company's ElcoMaster data management soƞware. An inte-
grated, dual-axis bubble level on the specimen table enables
users to quickly identify whether the table is correctly aligned
and, if required, adjust the rotating feet at the base of the unit.
Elcometer Inc. / 800-521-0635 / elcometerusa.com