Products Finishing

JUN 2017

Products Finishing magazine is the No. 1 industrial finishing publication in the world. We keep our readers informed about the latest news and trends in plating, painting, powder coating, anodizing, electrocoating, parts cleaning, and pretreatment.

Issue link: https://pf.epubxp.com/i/830013

Contents of this Issue

Navigation

Page 48 of 59

PRODUCTS FINISHING — PFonline.com 47 ELECTROCOATNG C L I N I C The bacterial identification and quantification occurs when the dipslides are dipped for 3 to 4 seconds in the specific liquid sample, capped in the container and then incubated as recommended by the dipslide manufacturer. Once the containers with the sample dipslides are allowed to incubate, the bacterial growth will be visually displayed on the exposed surface of the dipslide medium in the form of colored red or brown dots, also known as colonies. The unit of measure- ment used for comparison is the Colony Forming Units (CFUs) of bacteria detected per milliliter of sample. It is important to remember that it is the dot quantity that matters and not the size. Bacterial contamination in an ecoat system is consid- ered active when the CFUs/mL is 10 4 or greater, depending on specific configuration and operation of the pretreat- ment and ecoat system. Maintaining a system at 10 3 CFUs/ mL or below is critical. Again, the type of design and system, location, throughput, history and site-specific housekeeping, main- tenance and prevention practices and procedures make each system unique. WEBB-STILES offers more than 60 years of practical expertise in the Overhead Conveyor and Custom Engineered Conveyor Systems. Whether you are looking for a new system or having problems with a current system, contact a WEBB-STILES Sales Engineer for all your Conveyor needs. Valley City, Ohio Corporate Sales / Engineering / Manufacturing Gadsden, Alabama Webb-Stiles of Alabama Sales / Engineering / Manufacturing Webb-Stiles of Canada Sales Toronto, ON Ph: 330-225-7761 Ph: 888-272-3815 Ph: 256-492-6642 SAMES KREMLIN Inc. North America Headquarters - 45001 Five Mile Road, Plymouth, MI 48170 Canadian Branch - 931 Progress Avenue, Unit 7, Scarborough, ON M1G 3V5 HIGH PERFORMANCE SPRAYER AUTOMATIC POWDER BELL ■ One Inobell ® Replaces up to 3 Guns ■ Reduces or Eliminates Orange Peel ■ Higher Flow Rates than Automatic Guns ■ More Uniform Film Build ■ Up to 40" Spray Pattern ■ High First Pass Efficiency ■ High Transfer Efficiency SAMES KREMLIN introduces the NEW InoBell ™ Powder Bell Applicator Check out our new website! www.sames-kremlin.com (888) 332-0149 | marketing@exel-na.com Bond | Protect | Beautify toll-free: (866) 424-7252 www.airblastinc.com sales@airblastinc.com Air-Blast water off of parts traveling on a plating tank conveyor following the final rinse. Our system uses a heavy duty direct-drive blower, requiring little or no maintenance. It can accommodate tank widths from 2 to 12 feet.

Articles in this issue

Links on this page

Archives of this issue

view archives of Products Finishing - JUN 2017